Kasturi Sales

Features :-

1. High output power, each channel 3-5W, total 50W, effective jamming effect

2. Stable working even on large voltage fluctuation by 12V DC regulated power supply

3. Smart cooling system with ultra thick heatsink, large 6*6cm fans

4. Aluminum alloy out shell be dustproof, waterproof, heat-resistant, anti-corrosion

5. Easy to install

Specification

 

* Suggested installation height is 1.8-2.5 meter and please choose a place

where there are no barriers between jammer and target area

* Connect the antenna to main body by their identification signs 

* Connect the power supply with AC adapter

* Switch the power on; The jammer will start working in 3-5 second and

shield all signals as need in effective area

* Continuous nonstop use with AC power supply

 

 

Additional Information:

• Item Code: AT-MILITARY-36
• Pay Mode Terms: T/T (Bank Transfer),D/P
• Port of Dispatch: MUMBAI
• Production Capacity: 1000 PER MONTH
• Delivery Time: 15 DAYS
• Packaging Details: 10 NOS IN ONE CARTON AND 10 SMALL CARTON IN ONE BIG CARTON.

Additional Information:

• Production Capacity: 1000
• Delivery Time: IMMIDIEATE
• Packaging Details: CORRUGATED BOX

Phantom Technologies LTD.the Developers and Manufacturers:

• The MP806 is a lightweight ManPack Portable Tactical Jammer. This ManPack Jammer is based on DDS Technology, hence allows any user to create programmable, open communication windows.
• The unit has been designed to neutralize RF and Cellular Communication use by terrorist to activate IED, during special unit´s activity in the field.
• The MP806 uses Advanced Technology for Maximum performance and reliability. The system supports several open communication windows on each band. Programming the unit is easily done by connecting to a laptop, equipped with Phantom´s Manpack configuration software.
• MP806 goes with special Back Pack Case & Remote Control. Frequency bands and output power customization is also available.

• Total Output Power 105W

• Technical Specifications RF Characteristics
  Output Power	105W
  Internal Modulation	FM Hopping frequency
  Signal Source	PLL synthesized
  Power Supply	25.9VDC/27AH Li-Polymer Rechargeable Battery
  Modules Per Unit
  Remote Control	Wired/Wireless
  Antenna	External Omni-Directional
  Jamming Frequency Range
  Frequency Band	20-500 MHz 130-180 MHz 430-470 MHz 851-960 MHz 1805-1990 MHz 2110-2170 MHz 2400-2483 MHz 2620-2690 MHz
  Air Interface Standards	Digital: IDEN, TDMA, CDMA, GSM, UMTS Analog: AMPS, MNT, N-AMPS, TACS, HF/VHF/UHF Communication Radio
  Physical Data
  Dimensions	45 x 29 x 10.5 cm
  Weight	Approx. 12.5Kg
  Environment of operation
  Operating Temp	-20ºC - +65ºC
  Humidity	95%
  Mil Spec Standard	MIL- STD- 810F

   

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),D/P
• Port of Dispatch: MUMBAI
• Production Capacity: 20 per month
• Delivery Time: 30 days
• Packaging Details: wooden box packing

Phantom Technologies LTD.the Developers and Manufacturers:
The MP809 Portable Jammer is designed to neutralize RF and Cellular communication, during special unit's activity in the field. The MP809 uses Advanced Technology for Maximum performance, and is controlled by a Microprocessor for PLL & DDS programming. The MP809 transmits white noise signal which cuts-off RF communications at HF/VHF bands and UHF bands. The unit provides protection against RCIED (Radio Controlled Improvised Explosive Device), detonated remotely by Cellular and Wi-Fi networks. The protection Jamming radius is up to 50 meters at standard conditions (-65 dBm for GSM, -80dBm for UMTS/3G). The MP809 supplied with high quality Lithium-Polymer Batteries and provides 1.5 hours of continuous operation. MP809 goes with a special suitcase case and a remote control. Additional features such as "anti-radiation" gaskets are also available with the device.

Additional Special Features

• Remote control unit (20 meters wire)
• Thermal protection
• Low battery indicator (visual and audio warning when less than 10%)
• Open communication window interface for RF bands
• All Jamming bands are transmitted simultaneously
• 1.5 hours operation from internal battery between charges
• Visual and audio alarm informing on/off status and audio signal if device does not work properly.
• Protection against VSWR
• Power supply – 18-36 VDC
• External 230VAC Smart Charger
• Programming using laptop via USB/Ethernet
• Optional secured programming via Bluetooth
• Hot Swap batteries that can replace existing batteries without shutting down the system (Lithium Ion batteries or equivalent)
• Vehicle installation: the man pack can be mounted on the vehicle and connected to a power band inside the vehicle. This power bank is either to an additional alternator of the vehicle, additional batteries in the car or an energy generator (operated by Gasoline).
• Overload protection enables system to operate with 220-240 VAC 50 – 60 Hz
• Trolley man pack MP809 8 Bands 10 – 100Watt Per Band
• 20 MHz – 6 GHz:
• 20 - 120 MHz - 80W
• 120 - 520 MHz - 100W
• 800 - 950 MHz - 50W
• 1,805 - 1,990 MHz - 30W
• 2,100 – 2,170 MHz 50W
• 2,400 - 2,500 MHz - 10W
• 2,500 - 4,000 MHz - 20W
• 4,000 - 6,000 MHz - 20W
• Bands can be configured per demand

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),D/P,D/A
• Port of Dispatch: MUMBAI
• Production Capacity: 10 nos per month
• Delivery Time: 30 days
• Packaging Details: wooden box

Phantom Technologies LTD.the Developers and Manufacturers:
Description:

• The EAGLE108 Tactical Drone Jammer was designed to neutralize unauthorized drones/quadcopters as far as 2 km away, from entering secured fields and campuses.
  
  The EAGLE108 is based on a detection and Jamming units. The system scan for Drones by using an array of directional Antennas. Once a threat is detected, the system sends an automatic command to the Jamming unit and starts to block all radio communication channels, including GPS signals and video link.
  
  The system detects the general direction of the Drone, and transmits a specific beam directly to the Drone. At this point the drone will drift away and lose communication with its operator.
  The system is managed by a PC, which displays a general detection azimuth and Jamming status. The protection Jamming range can reach up to 2 k
• 2. The solution  concept and method of operations
• Phantom Technologies has developed and created in the last couple of years a technological response to this type of threat. Phantom's concept of operations relies on early detection of the drone threat by scanning the sky looking for hostile drones.
• 1. The emanating threat of drones
• In recent years the threat of drones has become increasingly vivid to many security agencies. Drones, nowadays, are used by terrorist and criminals for a multitude and variety of activities such as dropping small bombs on enemy forces in Syria and Iraq, and the same drones are often used for reconnaissance and surveillance.
• Notwithstanding, drones which are used by private individuals are creating a serious threat for civilian aviation while at the same time, criminals are using drones to smuggle drugs and cellular devices into prisons. Just in 2016, the Israeli prison authority admitted that 21 of attempted smuggling by drones have occurred in 2016. The bottom line being that the usage of drone has become an additional security threat to the already existing ones.
• The method of operations is based on four basic elements:
• a. Scanning the area of interest for drones
• b. Detect  the signal of the drone
• c. Identifying  the type of drone
• d. Jamming the drone signal to the operator
m away.
• Solution description
• The EAGLE108 Tactical drone Jammer was designed to neutralize the flight unauthorized Drones/Quadcopters by jamming their downlink signal. The EAGLE108 has unique software which allows quickly scanning the skies and jamming the hostile drone from ranges of up to 4km (with special dedicated antennas).
• Below is an illustration of the system as the system has two main segments, the first is a detection segment responsible for the detection of the drones. The second, the jamming segment of the drones
• Receiver  The basic system includes 2 receivers, a 2.4 and 5.8 receivers for Wi Fi. If and when there are additional drone telemetry transmissions to the operator, another receiver will be added to the system (upon customer requirements).
• RF from the RF Switch: RF switch is used to channel RF that comes from the different antennas to the receiver
• Data/Command to the PC: The data received from the antennas, meaning RF signals in from the different bands, is being transferred and relayed to the PC for further analysis.
• AC to Socket: electricity of the system.
• Communications box: the Com. Box is the main system providing communications and control between the different components of the system.
• Data/Command to the PC & Jammer: the data which us received form the receivers is transferred through the Com. Box to the PC and the jammers simultaneously.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),D/P
• Port of Dispatch: MUMBAI
• Production Capacity: 20 nos per month
• Delivery Time: 30days
• Packaging Details: WOODEN BOX

MODEL WLJ100 – 500m/W output power per band

The unit has been designed to block Wi Fi signals in an area surrounding the jammer.
The unit is controlled by a Microprocessor for PLL & DDS programming.
The WLJ100D transmits a narrow band white noise signal which cuts off predefined Wi-Fi channels & Bluetooth communications. The WLJ100D jammer can be programmed by the user to jam any number of discrete frequencies with in the RF coverage of the jammer.
All WLJ100D parameters are controlled remotely via an SNMP terminal such as RF output power and jammed frequencies.
This function utilizes the presence of the DDS technology within the jammer. The jamming range is up to 20 meters from the jammer.
The WLJ100D can be optionally supplied with high quality Lithium-Polymer Batteries that provide 2 hours of continuous operation.

TRF Characteristics 

Jamming Frequency Range Physical Data Environment of operation

 

 

Additional Information:

• Delivery Time: 15 DAYS

500mW Output Power/Band

The CCJ100 has been designed for blocking GSM cellular network and all kinds of cellular standards in the world.
The CCJ100 is using state-of-the-art technology for maximum performance.
The unit controlled by Microprocessor for PLL programming.
The CCJ100 transmits a noise signal which cuts-off all cellular communication between mobile phones and cellular cells.

The jamming radius depends on the signal strength in given area.
All cellular mobile phones in vicinity of the CCJ100 will be totally BLOCKED and will not be able to receive or dial outgoing calls.

When CCJ100 affects the mobile the display will show “NO SERVICE”.

 

Opoperational Scenario Erational Scenario

•         Libraries
•         Court rooms
•         Offices
•        Concert halls & Theaters

 

TECHNICAL SPECIFICATIONS RF Characteristics
Jamming Frequency Range Physical Data
Environment of operation Optional Accessories

Additional Information:

• Delivery Time: 15 DAYS

General Description The CCJ800PL was designed for blocking GSM cellular networks and all other cellular, satellite and WiFi standards in the world. The CCJ800PL use state-of-the-art technology for maximum performance. The unit is controlled by a Microprocessor for PLL programming. The CCJ800PL transmits a noise signal which cuts off all cellular communication between the mobile phones and the cellular cells. The jamming radius depends on the signal strength in the given area. All cellular mobile handsets in the vicinity of the CCJ800PLwill be totally BLOCKED and will not be able to receive or dial outgoing calls. When the CCJ800PL affects a mobile phone, the display will show "NO SERVICE". The CCJ800PL can be installed for remote control and monitoring via an Ethernet network.
RF Characteristics
Output Power per band 15W per band
Internal Modulation FM Hopping frequency
Signal Source PLL synthesized
Modules Per Unit Up to 7 bands Jamming Frequency
Jamming Frequency Range
Frequency Bands All cellular and Wi Fi bands
Air Interface Standards Digital: IDEN, TDMA, CDMA, GSM, UMTS, LTE Satellite: Thuraya, Inmarsat, Iridium
Physical Data

• Dimensions Pelican 1650 544 x 419 x 200 mm
• Weight Approx. 35Kg
• Environment of operation
• Operating Temp. -20ºC - +65ºC
• Humidity 5% - 80%
• Internal Batteries
• Capacity 25.9VDC / 30 AH
• Type Lithium-Polymer
• Duration Min. 1 Hour with 6 bands

The second, the active cellular system that provides the ability to connect to the regular cellular network when jamming is in session. The selectivity of this cellular jammer enables the system to block only cellular phones identified as threatening. This feature lengthens the device's battery life, channeling high output power efficiently. How does it operate: The user defines a list of “friendly cell phones”, called “white list” that will never be blocked. Consequently, when the jamming system is on in GSM/UMTS, our second system, the Active Cellular System (a 'fake' BTS) provides a 'clear channel' within the jamming bands. This allows the predefined 'white list' numbers to go through to the regular cellular network at the same time when jamming is conducted. In parallel, if there are cellular devices that will try to use the 'fake BTS in order to conduct phone calls to the outside of the prison (to the regular cellular network), they will be automatically blocked by the BTS. This feature allows the user to communicate freely without the concern of being blocked by the selective jammer. The system includes our top-of-the-line IMSI catcher, designed to detect the IMSIs and the IMEIs present and active in the designated area for both 2G and 3G Phones. This capability enables the device's operators to identify possible threats. The unit is lightweight and can be installed in a Pelican case. The SCJ1800 is ideal for high-power identification and jamming. Its user can identify, monitor and log IMSI numbers active in a GSM network, and selectively jam only those that are unauthorized. System Special Features  By using relatively low RF output power, the system enables the coverage of large areas.  A "white list" feature which distinguishes between authorized and unauthorized cell phones.  Up to 5,000 cell phones on the "white list"  Software Define Radio (SDR) enables great flexibility and future upgrades  Easy-to-use management system  Available for use with Omni-directional antenna or directional antenna  Full list of cell phones in the covered area  The user can easily detect all active IMSIs and IMEIs and block transmissions. Moreover, by composing a "white list" of numbers never to be blocked, the device automatically allows the white listed numbers to go through to the regular cellular network.

RF Characteristics
Power Supply 12-24VDC
Current 2A Max.
BTS's number According to need
Remote Control ON/OFF & MODE Via Fiber Optic
Antenna External – Omni-Directional or High Gain Directional
Power Amplifier Protectors Isolator.
Full VSWR protector Over Heat – Thermal protector Over Current protector
TX PWR 47 dBm
SNR 141-143.5 dB /Hz
BW 10-75 MHz Memory SDRAM 128 MB/Band
Jamming Frequency Range Frequency Band
For illustration only:
RX Bands GSM 824-894 MHz
GSM 890-915 MHz
DCS 1710-1785 MHz
PCS 1850-1910 MHz
TX Bands GSM 865-894 MHz
GSM 935-960 MHz
DCS 1805-1880 MHz
PCS 1930-1990 MHz
Air Interface Standards GSM
Physical Data Dimensions 254 x 160 x 240 mm
Weight <10 Kg

SPECIAL FEATURES
A “white list” feature which distinguishes between authorized and unauthorized cell phones.
Up to 5,000 cell phones on the “white list”
Software Define Radio (SDR) enables great flexibility and future upgrades
Easy-to-use management system
Available for use with Omni-directional antenna or directional antenna
Full list of cell phones in the covered area
The user can easily detect all active IMSIs and IMEIs and block transmissions. Moreover, by composing a “white list” of numbers never to be blocked, the device automatically allows the white listed numbers to go through to the regular cellular network.

Additional Information:

• Delivery Time: 20DAYS

Phantom Technologies LTD.the Developers and Manufacturers:
Bus Tracking System The EW1600 is a Vehicle-Mounted High-Power Tactical Jammer designed for blocking satellite communication. The EW1600 is using Advanced Technology for Maximum performance. The unit is controlled by a Microprocessor for DDS programming and uses a unique Modulation Technique based on a mixed signal for Maximum Jamming efficiency. Each EW1600 Module transmits unique noise signal, which creates a "firewall” between the satellite and its receivers. The Jamming signal is being generated by Multi-VCO chain and DDS, which results in very high sweeping rate along the bands, hence create high RF density in each part of the protected frequency band. The jamming distance of EW1600 depends on several conditions, such as antenna angle to receiver, transmitter and output power, distance to receiver etc. System modularity allows flexible usage in different applications. The system supports simultaneously Jamming of 5 bands and uses Broadband Directional Antennas for the selective Jamming area.

Applications:

• Special Military Units
• Special Police Units
• Government Agencies

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),D/P
• Port of Dispatch: MUMBAI
• Production Capacity: 20 nos per month
• Delivery Time: 30days
• Packaging Details: wooden box

Phantom Technologies LTD. The Developers and Manufacturers:
Other Details:

• RCIED Convoy Bomb Jammer Protection
• Convoy RF Jammers are used to transport Personnel with High-Security Profiles. Our Convoy Jammers block all GPS transmissions, making it impossible for remote-controlled bombs and other GPS-dependent devices to interfere.
• The Convoy Jammer's Operating System can be fully controlled from the driver's seat to ensure the optimal user experience. Our vehicle mounted Counter-IED Jammers have 360 protection, and are thus able to protect other vehicles in the convoy.We have wide range of Jamming systems for Convoy and VIP protection. Our vehicle mounted Counter IED Jammers are designed to mitigate all RCIED threats used by terrorists and insurgents. Wide range of output power and different sizes make our products usable for many types of private vehicles and jeeps.The RCJ1390LT-I is a very high power, vehicle-mounted jammer designed for blocking remote-controlled improvised explosive devices usually used by terrorists.
• The RCJ1390LT-I is based on a state-of-the art technology for maximum performance.
• The jamming signal is generated by a Multi-VCO chain which causes a very high sweeping rate along the bands, hence creating high RF density in each part of protected frequency band.

• The jamming radius of the RCJ1390LT-I depends on several conditions, such as the transmitter frequency and output power, the distance to the receiver and the obstacles between them.

  System modularity allows flexible usagein different applications.

  The system uses a broadband omni-directional antennas for 360º

  Protection

  Applications

  •  Special Military Units                             
  •  Special Police Units
  •  VIP Protection
  •  Bomb Disposal
  •  Convoy Protection etc.

• System Features

  •  Designed to block wireless communication including HF, VHF, UHF, SHF, Cellular Networks, Satellite Phones, GPS etc.
  •  Output power up to 180W and 150W per band
  •  Modules of Jammer operates separated;
  •  Separate switch ON/OFF and switch Operation Modes control for each frequency band.
  •  Control output power for cellular bands from 5W up to 180W
  •  External antennas

   

•  Remote control

   Specific signal source per band for maximum jamming

   The system has 3 modes of operation:

   

• 1. Sweep Mode Jamming the whole frequency band at an ultra-fast Speed continuous sweeping.

  2. Spot Mode Jamming 4 frequencies from list of 10 pre-programmed.

  3. Open Communication Window Allows open

  communication from 6 pre-programmed options. Thus frequencies can be changed in factory when customer needs

• Modules Division

  •  Module 1: 20–120 MHz & 120-200 MHz
  •  Module 2: 200-300 MHz & 300-450 MHz
  •  Module 3: 470-800 MHz & 894-925 MHz
  •  Module 4: 960-1400MHz & 1400-1700 MHz
  •  Module 5: 1700-1805 MHz & 1880-1930 MHz
  •  Module 6: 1990-2110 MHz & 2170-2500 MHz
  •  Module 7: 2500-3000 MHz & 3000-3500 MHz
  •  Module 8: 450-470 MHz & 800-894 MHz
  •  Module 9: 925-960 MHz & 1805-1880 MHz
  •  Module10: 1930-1990 MHz & 2110-2

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),D/P
• Port of Dispatch: MUMBAI
• Production Capacity: 20 nos per month
• Delivery Time: 30days
• Packaging Details: wooden box

Phantom Technologies LTD.the Developers and Manufacturers: RSJ470 Responsive Bomb Jammer

The RSJ470 Tactical Bomb Jamming unit is designed for blocking RF based initiation of RCIEDs (Radio Controlled Improvised Explosive Device).

The system is comprised of two main RF blocks:
SFDR - Software Defined Radio
A DDS-based Jammer

       
During normal operation, the system "listens" to the predefined spectrum and collects the RF atmosphere in the protected band. The collected data is analyzed in real time, and full flow and its output contains the frequency measurement, the signal's characteristics and the RF signal level.

Once any signal inside the protected band is classified by the system as threat, the Jammer takes action and transmits a white-noise signal. The signal Jams the communication between the receiver and the transmitter. This transmission lasts for several milliseconds, and then returns to reception mode, continuing to monitor the designated spectrum.

The user defines the threshold level for receiving signals to be jammed. Scanning time is fast enough to jam DTMF based initiated RCIEDs.

The minimum channel step is 10 KHz and maximum step is 1MHz. The user can also define the number of channels to be monitored and to be Jammed whenever the RF energy level is greater than the set threshold.

The IF bandwidth can be selected between 15 KHz to 2MHz based on a digital filter.

AM & FM demodulators are integrated part of the system and can be used for real-time listening purposes.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),D/P
• Port of Dispatch: MUMBAI
• Production Capacity: 20 nos per month
• Delivery Time: 30days
• Packaging Details: wooden box